Sản phẩm
Đồng hồ đo Áp Suất
Nhà Sản Xuất :

Pressure measurement is our home turf: for measuring relative and total pressure you will find products with capsule elements and Bourdon springs at Baumer. Or absolute and differential pressure measuring equipment for pressures from 25 mbar to 1600 bar. Thanks to their robust stainless steel housing our instruments are also suitable for use under the tough conditions and in the demanding environments found in the oil and gas or petrochemical industries, and can also be used without any problems in areas where hygiene rules apply, and for applications where sea-water is used.

MMX1

  • Nominal size: 40 mm
  • Approval: ATEX II2GDc-IM2c
  • „For corrosive gases and liquids
  • „„Fully welded process connection

MEX2

  • Nominal size: 50 mm
  • Approval: ATEX II2GDc-IM2c, Lloyd's Register, Gost
  • „For corrosive gases and liquids
  • „„Fully welded process connection

MEX3 / MEM3

  • Nominal size: 63 mm
  • Approval: ATEX II2GDc-IM2c, Lloyd's Register, Gost
  • „For corrosive gases and liquids
  • „„Fully welded process connection

MEX5 / MEM5

  • Nominal size: 100 mm
  • Approval: ATEX II2GDc-IM2c, Lloyd's Register, Gost
  • „For corrosive gases and liquids
  • „„Fully welded process connection

MIX7 / MIM7

  • Nominal size: 150 mm
  • Approval: ATEX II2GDc-IM2c, Lloyd's Register, Gost
  • „For corrosive gases and liquids
  • Long term reliability

MEX8

  • Nominal size: 160 mm
  • Approval: ATEX II2GDc-IM2c, Lloyd's Register, Gost
  • „For corrosive gases and liquids
  • Long term reliability

MMN5

  • Nominal size: 100 mm
  • Approval: ATEX II2GDc-IM2c, Lloyd's Register, Gost
  • For corrosive atmospheres and fluids
  • Long term reliability
  • Safety version S3 according to EN837-1

MPF6 / MPJ6

  • Nominal size: 130 mm (4.5")
  • Approval: Gost
  • For corrosive gases and liquids
  • With or without damping fluid

DPC100

  • Nominal size: 100 mm
  • Approval: ATEX II2GDc-IM2c, Gost
  • Welded with blow-out disc, back
  • For gaseous and liquid, aggressive, high and low visconsity media
  • High overpressure safety

MTA2

  • Nominal size: 50 mm
  • Measuring ranges: 0 ... 60 mbar to 0 ... 600 mbar
  • Low pressure measurements
  • for clean and non-corrosive gases

MTA3

  • Nominal size: 63 mm
  • Measuring ranges: 0 ... 60 mbar to 0 ... 600 mbar
  • Low pressure measurements
  • for clean and non-corrosive gases

MTA5

  • Nominal size: 100 mm
  • Measuring ranges: 0 ... 16 mbar to 0 ... 600 mbar
  • Low pressure measurements
  • for clean and non-corrosive gases

MCX5

  • Nominal size: 100 mm
  • Measuring ranges: 0 ... 10 mbar to 0 ... 600 mbar
  • Low pressure measurements
  • High overpressure protection
  • Suitable for corrosive gases

MCX7

  • Nominal size: 150 mm
  • Measuring ranges: 0 ... 6 mbar to 0 ... 600 mbar
  • Low pressure measurements
  • High overpressure protection
  • Suitable for corrosive gases

MAT1

  • Nominal size: 40 mm
  • Measuring range: 1... 0 to 0... 400 bar
  • Conform to EN 837-1 standard
  • Pressure Directive PED 97/23/CE

MAT2

  • Nominal size: 50 mm
  • Measuring range: 1... 0 to 0... 400 bar
  • Conform to EN 837-1 standard
  • Pressure Directive PED 97/23/CE

MAT3

  • Nominal size: 63 mm
  • Measuring range: 1... 0 to 0... 400 bar
  • Conform to EN 837-1 standard
  • Pressure Directive PED 97/23/CE

MIT3

  • Nominal size: 63 mm
  • Measuring range: -1... + 0 to 0...+ 1000 bar
  • Stainless steel case
  • Anti-vibrating system

MAT5

  • Nominal size: 100 mm
  • Measuring range: 1... 0 to 0... 400 bar
  • Conform to EN 837-1 standard
  • Pressure Directive PED 97/23/CE

MIT5

  • Nominal size: 100 mm
  • Measuring range: -1 ... + 0 to 0 ...+ 1000 bar
  • Stainless steel case
  • Anti-vibrating system

MCD7

  • Nominal size: 150 mm
  • Measuring range: 0 ... 10 mbar to 0 ... 250 mbar
  • For non corrosive gases and aggressive environment
  • Safety valve on high pressure side

MMF7

  • Nominal size: 150 mm
  • Measuring range: -1 ... 0 to 0 ... 600 bar
  • Can be used in corrosive gases and liquids that are not crystallizing
  • Approval: Lloyd's Register

MMJ7

  • Nominal size: 150 mm
  • Measuring range: -1 ... 0 to 0 ... 600 bar
  • For corrosive gases and liquids
  • Class 1 according to EN 873-1

Các sản phẩm khác
Pressure switches
Rosemount Pressure Transmitters
DP Flow Products
Differential Pressure Level Measurement
Rosemount Manifolds
Khách hàng
Hỗ trợ trực tuyến
028 3811 0511 028 3811 0510
My status My status
Liên kết Web
© 2011 Cty TNHH Kỹ Thuật Việt Thắng Lợi, Lầu 3B Tòa Nhà Scetpa, 19A Cộng Hòa, P. 12, Q. Tân Bình, HCM, Email: info@vtltech.com.vn, Tel: 028 3811 0510