Sản phẩm
M-Series Positive Displacement Flow Meters
Nhà Sản Xuất : Liquid Controls

 

Materials of Construction
  • Meter and rotors:
    Cast aluminum (other metalurgies available including cast iron and stainless steel)
  • Internal components:
    Aluminum, Ni-Resist, stainless steel, iron
  • Seal materials:
    Buna-N, Viton®, PTFE
  • Bearings:
    Carbon, PTFE, Ni-Resist

 Liquid Controls M-Series meters meet NTEP (NIST Handbook 44) and International Weights and Measures accuracy requirements as well as U.S. Military specifications.


Design Features

Liquid Controls M-Series rotary motion positive displacement (PD) meters offer the ultimate in measurement accuracy for custody transfer of petroleum products, aviation fuels, LPG, and a broad range of industrial liquids. LC meters incorporate a unique design, presenting minimal intrusion in a flowing stream of liquid, as well as minimal pressure drop through the meter. The LC meter consists of a housing in which three synchronized rotors turn with no metal-to-metal contact. Hydraulic sealing is accomplished by a stationary boundary layer of liquid, not by the wiping action of mechanical parts

  • Low pressure drop—will operate on gravity flow or pump pressure.
  • Sustained accuracy—no wear from metal-to-metal contact inside the measuring chamber means minimal deterioration in accuracy over time, fewer recalibrations, and longer service life. Meters conform to NIST and International Weights and Measures accuracy requirements.
  • Wide temperature range—products can be metered accurately from -40° F (-40° C) to 160° F     (71°C).
  • Wide viscosity range—LC meters can accurately meter products from less than 30 SSU (less than 1 centipoise) to 1,500,000 SSU (325,000 centipoise).
  • Maximum adaptability—right angle design with choice of stock or custom elbows/ fittings provides unequaled mounting flexibility to meet your installation requirements.
  • Rated to 150psi / 10.5 BAR.


Specifications

M-Series Positive Displacement Flow Meters:
150psi / 10.5 BAR

Available Models Size Maximum Nominal Flow Rate
M5

1-1/2" or 2"

60 gpm / 227 L/min
M7

2" or 1-1/2"

100 gpm / 380 L/min
M10

2"

150 gpm / 550 L/min
M15

3"

200 gpm / 757 L/min
M25

3"

300 gpm / 1,136 L/min
M30

4" or 3"

350 gpm / 1,325 L/min
M40

4"

450 gpm / 1,700 L/min
M60

4" or 6"

600 gpm / 2,271 L/min
M80

6"

800 gpm* / 3,000 L/min

*Capable of momentary overspeed to 1000 gpm


Literature

Application Brochures
Meter Bill of Materials
Engineering Documents
M/MA-series Installation and Operation Manuals
Product Overviews
Specification Sheets


Accessories
M-Series meters are available with a selection of bolt-on strainers and air eliminators for the inlet side, and a selection of manual or solenoid actuated valves for the meter outlet. Mechanical and electronic registration equipment and printers are also available.

 

Các sản phẩm khác
TOPTECH MultiLoad II BATCH CONTROLLER
MS-Series Positive Displacement Flow Meters
Khách hàng
Hỗ trợ trực tuyến
028 3811 0511 028 3811 0510
My status My status
Liên kết Web
© 2011 Cty TNHH Kỹ Thuật Việt Thắng Lợi, Lầu 3B Tòa Nhà Scetpa, 19A Cộng Hòa, P. 12, Q. Tân Bình, HCM, Email: info@vtltech.com.vn, Tel: 028 3811 0510