Certifications and compliances

NEC and CEC

• Class I, Division 2, Groups A, B, C, D
• 175W max – Class II, Class III & Simultaneous Presence (Class I, Division 2 and Class II)
• Class I, Zone 2

IEC 

• Zone 2 Ex nR IIC

UL Standards

• 844 Hazardous (Classified) Locations
• 1598 Luminaires
• 1598A Marine Locations

CSA Standard

• C22.2 No. 137

IEC Standard

• 60079-15

• Cast copper-free aluminum construction (less than 0.4 of 1% copper) and epoxy powder finish provide excellent resistance to corrosion
• Seven mounting arrangements to suit any lighting layout – pendant, flexible pendant, ceiling, wall bracket, angle stanchion, straight stanchion and quad mount
• Wide range of light sources and wattages to meet specifiers' needs: 50, 70, 100, 150 watt high pressure sodium (HPS); 70, 100, 175, 250 watt metal halide (MH)
• Hinged ballast housing for ease of installation and maintenance
• All luminaires designed to perform in a 40°C ambient temperature; selected luminaires are suitable for ambient temperatures up to 65°C
• Superior gasketing seals between the mounting module, housing and optical assembly for optimum performance in wet and corrosive environments
• Hubs with an integral conduit stop and bushing to help prevent damage to field wiring during installation
• Low ambient capability to (-40°C)
• Dome and 30° angle reflectors made of bright white Krydon material provide superior reflectivity, with twist-on feature requiring no tools or additional hardware; will not chip, peel, dent, rust or corrode
• Mogul base porcelain lamp socket
• Stainless steel open bottom guard permits direct access to the globe for easy relamping
• Grounding wire for safety
• Ballasts available in voltages of 120, 208, 240, 277, 347, 480, 600 and multi-tap

• Ballast housings and mountings – copperfree aluminum (less than 0.4 of 1% copper)
• Guard and exterior hardware – stainless steel
• Reflectors (dome and angle) – Krydon fiberglass-reinforced polyester material
• Globes – heat and impact resistant, internally fluted glass